-40%

12 Feet 1/2'' Dual-Wall Adhesive Glue Lined Heat Shrink Tube 3:1 Ratio Marine

$ 7.91

Availability: 21 in stock
  • Brand: Unbranded
  • Condition: New
  • Type: Cable Sleeve
  • Color: Black,Red

    Description

    Specification
    Length: Black 6 Foot+Red 6 Foot
    Material: Polyolefin
    Heat shrink ratio: 3:1
    Operating Temperature:-131°C to + 257℉
    Shrinkage Temp: 212℉(Fahrenheit)
    Full Shrinkage Temp: 230℉maximum
    Tensile strength: 10.4Mpa
    Dielectric strength: 15 kV / mm
    Flammability: Flame Retardant
    Adhesive lined shrink tubing is a 3:1 flexible tubing offering the advantages of integral, adhesive-lined construction. The tubing is made from flexible polyethylene with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively cross-linked, while maintaining the high flow and excellent adhesion of the inner sealant liner. When heated in excess of 121ºC (250ºF), the tubing rapidly shrinks to a skintight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water resistant barrier. Adhesive reflow will occur at temperatures above 80ºC (176ºF).
    Heat Shrink Tubing Detail
    (HCHO), heavy metals and other harmful substances protecting you and your family from toxins
    [The rubber liner has good sealing performance] Our heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
    [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3.
    [Versatile and DIY Helper]: High-quality heat shrink tubing, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection.
    [Great Advantages ]: Our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
    [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on.
    About 3:1 Ratio Heat Shrink Tubing
    What is it good for?
    Industrial adhesive lined shrink tubing offers excellent protection for electronic components, wire splices, wire bundles and harness breakouts. Automotive, truck and marine wiring splices and harness breakouts are quickly and easily protected from harsh environments.
    What is Shrink Ratio?
    Industrial adhesive lined shrink tubing has a 3:1 shrink ratio. This means that the starting diameter of the tubing as supplied is 3 times the fully contracted diameter if allowed to completely shrink. The wall thickness of the tubing is proportional to the percentage of shrinkage.
    5PCS 10 Position Dual Row Wire Connector Screw Terminal Barrier Strip 600V 15A
    13.49 USD
    Free shipping
    200PCS Mixed Types Heat Shrink Insulated Connectors Butt Wire Spade Terminals US
    21.99 USD
    Free shipping
    400PCS 18 Sizes Insulated Terminals Connectors Crimp Electrical Wire Kits
    22.99 USD
    Free shipping
    540PCS Multi Types Heat Shrink Terminals Electrical Wire Connector Waterproof
    48.69 USD
    Free shipping
    50PCS RV2-5S AWG 16-14 Blue PVC Sleeve Pre-Insulated Ring Terminals Connector
    8.59 USD
    Free shipping
    100PCS 22-16AWG Insulated Spade Connectors Crimp Terminals Electrical Wire
    9.19 USD
    Free shipping
    35PCS Heat Shrink Solder Sleeve Tube Wire Terminal Splice Connectors 4 Size
    9.69 USD
    Free shipping
    340PCS Heat Shrink Butt Connectors Terminals Electrical Wire Waterproof Seal
    29.79 USD
    Free shipping
    10PCS Heat Shrink Tubing Dual Wall Adhesive Lined Glue Tube 3:1 Ratio Marine US
    9.59 USD
    Free shipping
    200PCS Insulated Butt Splice Crimp Connectors Butt Wire Terminals PVC Sleeves
    16.79 USD
    Free shipping
    200PCS Heat Shrink Soldering Connectors Wire Seal Waterproof Terminals 16-14AWG
    20.19 USD
    Free shipping
    300PCS Non-insulated Electrical Wire Crimp Terminals Butt Connectors 3 Types
    17.89 USD
    Free shipping
    5 Feet 5/8" Black Insulation Shrinkable Tube Heat Shrink Tubing 3:1 Wire Wrap
    9.99 USD
    Free shipping
    200PCS Waterproof Red Wire Butt Connectors Seal Sleeves Terminals AWG 22-18
    13.19 USD
    Free shipping
    150PCS 3 Types Non-insulated Butt Crimp Connectors Terminals Electrical Wire
    13.79 USD
    Free shipping
    100PCS Blue PVC Sleeve Pre Insulated Ring Terminals Crimp Wire Connector RV2-5S
    9.29 USD
    Free shipping
    200PCS Heat Shrink Spade Quick Disconnects Female Male Connectors 0.5-1.5mm² US
    16.99 USD
    Free shipping
    4500psi Refill Station Filling with Hose For Air Tank Scuba Cylinder PCP Diving
    68.99 USD
    Free shipping